HERETIC
				Install Instructions

1.	Exit Windows
2.	At the DOS prompt, access your CD-ROM drive by
	typing: D: (if your CD-ROM is "D" drive) and press 
	[ENTER]
3. 	Type: cd HERETIC and press [ENTER]
4.	Type: INSTALL and press [ENTER]
5.	Have FUN!!!

If you require technical assistance to install or run Heretic, call id Software's technical support line at (303) 339-7111 or e-mail help@idsoftware.com.

------------------------------------------------------------
HERETIC Version 1.0 release notes:
------------------------------------------------------------

Welcome to the Heretic README file. Although Heretic: City of the Damned is available for you to play, id will not begin to take orders for the full three episode version of Heretic until Wednesday, December 28, 1994. 

To register the entire Heretic trilogy call 1-800-IDGAMES. If you live outside of the USA, or if you wish to purchase Heretic with a check or money order please refer to the text file, (ORDER.FRM) located in your Heretic directory. 

Also, if you are having problems running this version of Heretic please wait until Wednesday, December 28, 1994 before calling for technical assistance.

id Software respectfully requests that you do not modify the levels for the shareware version of Heretic.  We feel that the distribution of new levels that work with the shareware version
of Heretic will lessen a potential user's incentive to purchase the registered version.

If you would like to work with modified levels of Heretic, we encourage you to purchase the registered version of the game. 

------------------------------------------------------------
Additional support
------------------------------------------------------------

If you are looking for external PWADs for Heretic, DOOM or DOOM2, look no further than the DOOMania! BBS, owned and operated by Paul Johnson.  The BBS number is (317) 662-8842, the voice number is (317) 662-1449.

------------------------------------------------------------
Auxiliary programs
------------------------------------------------------------

There are a number of auxiliary programs that come with Heretic. These are DM.EXE, the DeathManager you use as a front-end for network and modem play; DWANGO.EXE, the client software for the NEW multiplayer gaming environment of the future; IPXSETUP.EXE, the IPX Network Device Driver that enables you to play Heretic over an office network that uses the IPX protocol and SERSETUP.EXE, the Serial Device Driver that enables you to play Heretic over the modem or serial cable.

The documentation for the DM.EXE program is named DM.TXT, the documentation for the DWANGO.EXE program is named DWANGO.TXT. The documentation for the IPXSETUP.EXE and SERSETUP.EXE programs follow.

------------------------------------------------------------
Heretic ADDENDUM
------------------------------------------------------------
Welcome to Heretic. Before playing, you might want to read this addendum which contains information for playing in Multiplayer mode, as well as technical support and troubleshooting instructions. To avoid compatibility errors, please make sure that your machine and network conform to the system requirements listed below.

-------------------------------------------------------------
SYSTEM REQUIREMENTS
-------------------------------------------------------------
Heretic(TM) requires an IBM compatible 486 or better with 4 megs of RAM, a VGA graphics card, and a hard disk drive. A 486/66 or better, a Sound Blaster Pro(TM) or 100% compatible sound card is recommended. A network that uses the IPX protocol is required for network gameplay. 

-------------------------------------------------------------
MULTIPLAYER MODE
-------------------------------------------------------------
GETTING STARTED
-------------------------------------------------------------
1. Install Heretic as described in the manual. 

2. Launch Heretic from the SETUP program, by going to the directory in which you installed Heretic, type SETUP, and press the ENTER key. (If you are installing Heretic for the first time the SETUP program will be automatically launched.)  Unlike playing Heretic in single player mode, Heretic in multiplayer mode must be run either from the DM program, the SETUP program or by using the command line parameters mentioned later in this addendum. 

3. The SETUP program not only allows you to configure Heretic to your system but lets you tell Heretic information that is necessary for the multiplayer game, (i.e. number of players, skill level, mode, etc.), although the DM program is the preferred method of starting a network game.

NUMBER OF PLAYERS: A maximum of four people can play multiplayer Heretic on a network. 

COMPATIBLE NETWORKS: To play multiplayer, you must have a network that uses the IPX protocol. Check your network manuals for information regarding your protocol. Novell networks use the IPX protocol. 

MULTIPLE GAMES ON THE NET: To play a multiplayer game while another group is also playing the multiplayer game, you'll need to change your network port address from the SETUP application. The port address tells your server where to send information that is sent over the network. Network addresses range from 1-64000. You should refer to the person in charge of your network for possible port addresses.

-------------------------------------------------------------
MULTIPLAYER INSTRUCTIONS
-------------------------------------------------------------
Many of the rules for playing Heretic change for the multiplayer game. Read the following information carefully before you begin to play Heretic in multiplayer mode.

MENUS: When you activate the Options menu or submenus, the game KEEPS RUNNING so that other players can continue with the action. So it is best to find a safe place before adjusting screen sizes or sounds.

UNPAUSE: A player may Pause the game by pressing the PAUSE key, but any other player can Unpause the game by pressing the PAUSE key again. Make sure it's OK with your buddies before taking a breather.

SAVE: When you do a savegame during a network game, it saves on every player's system in the savegame slot you select, writing over whatever was there. Before saving the game, players should agree on a safe slot to save in.

LOAD: You cannot load a saved game while playing a multiplayer game. To load a game everyone must quit from the current game and restart the game from the saved game. To start a game from a saved game, you can either select it from the SETUP program or identify it as a command line parameter.

DEATH: If you die and restart in the level, previously destroyed monsters DON'T reappear. Even though you've died, other players have survived. We didn't want to undo all of their fine destruction by reviving every monster in the area. However, this also means the level will eventually run dry of monsters. You'll have to decide when the level is played out.

UNIFORM COLORS: In net games, each player's uniform is a different color. The color of your character is the color of the life gem on the status bar's life chain. The colors are BLUE, YELLOW, GREEN, and RED. 

CHAT MODE: In a multiplayer game you can communicate with other players in the Chat mode. To enter into Chat mode and broadcast a message to all the players, press the letter t. A cursor will appear where your messaging is normally placed. To broadcast to a specific player, instead of pressing t you'll need to press the first letter of the player's color. (B)lue, (Y)ellow, (G)reen, and (R)ed. For example, to send a message to the blue character, you would press the letter b.

CHAT MACROS: In a multiplayer game, you can send your ownpre-defined macros (defined in the SETUP program) by initiating Chat mode (as stated above), then holding ALT and pressing the number key that corresponds to the macro you wish to send. For example, if macro #2 is "Eat it and die!", initiate Chat mode by pressing 'T', then hold down ALT and press 2.

EXITING A LEVEL: When one player exits a level, all players instantly exit with him, regardless of their position or their status.

-------------------------------------------------------------
COOPERATIVE OR DEATHMATCH MODE
-------------------------------------------------------------
There are two ways to play multiplayer--DeathMatch and Cooperative. In Cooperative mode the players work together. In DeathMatch mode your mission is to kill everything that moves, including your buddies. You can choose which mode you wish to play from the DM or SETUP applications. The differences between Cooperative and DeathMatch mode are as follows:

WHERE YOU START: In Cooperative mode each player begins in the same area. In DeathMatch mode the players begin in completely different areas--if you want to see your buddy you'll need to hunt him down. Plus, each time you die, you'll restart in one of several random locations.

KEYS: Unlike in single-player or Cooperative mode gameplay, in DeathMatch mode the players start each location with the keys necessary for opening any locked door in that area.

STATUS BAR: In DeathMatch mode the LIFE section on the status bar is replaced with KILLS. The KILLS section displays the number of times you've killed your opponents.

AUTOMAP: In Cooperative mode the Automap works the same way it does in single-player mode. Each player is represented by a different color arrow. In DeathMatch mode you won't receive the pleasure of seeing your opponents on the map. Just like the monsters, your friends could be just around the corner, and you won't know until you face them.

SPY MODE: If you're playing in Cooperative mode, press F12 to toggle through the other players' viewpoint(s). Press any other key to return to your view. You still retain your own status bar at the bottom, and if your view reddens from pain it is YOU, not your partner, who has been hit.

INTERMISSION SCREENS: In both Cooperative and DeathMatch mode the intermission screen tallies your achievement. In Cooperative mode the intermission screen lists the achievements for all players in the game. In DeathMatch mode the intermission provides a death count on everyone, letting you know who killed whom.

-------------------------------------------------------------
DEATHMATCH MODE GAMEPLAY NOTES
-------------------------------------------------------------
The rules for completing or winning a DeathMatch game have intentionally been left general. Any player can exit an area and force all of the players to move to the next area. Also, there is no limit on how many kills are required to declare a player the winner. We decided to leave this up to you. You know what you like best! 

Note: Before you play Heretic in DeathMatch mode you should be familiar with the layout of every area in Heretic. As you know, in DeathMatch mode your startup location is random and often in an area that is very hostile. 

-------------------------------------------------------------
MULTIPLAYER DEMO RECORDING
-------------------------------------------------------------
You can record your tournaments for posterity!  To record multi-player demos, add the line "-record demoz" to the command-line. Make sure the other player is recording also, or it won't work. If you need more time, add the "-maxdemo <K>" option to increase demo buffer space.  Make sure both of you specify the same amount. Heretic defaults to 128K of demo buffer space, to specify 1meg you would type "-maxdemo 1024" on the command-line.

IF HERETIC BOMBS TO DOS WITH A "Z_MALLOC" ERROR, YOU DON'T HAVE ENOUGH MEMORY FOR THE MAXDEMO AMOUNT SPECIFIED!

When you wish to stop recording, press the Q or F10 keys and both players will exit to DOS.  To play the demo back, merely type, "heretic -playdemo demoz" and the demo will play back.  To see the other player, press the F12 key.  Press F12 to toggle between all players in the demo.  The TAB key will display the automap.

You can set the name of the demo file to anything you want. "demoz" was just an example name.

-------------------------------------------------------------
RUNNING HERETIC FROM THE COMMAND LINE 
-------------------------------------------------------------
Much of the information you give to Heretic through the DM and SETUP program can be provided by passing program parameters to the appropriate device driver on the command line. 

NETWORK PLAY
------------
When you want to run a network game, you use IPXSETUP.EXE which is the device driver for Heretic's network mode. The parameters are as follows:

-NODES starts Heretic as a network game and sets the number of players who are going to play. If you don't specify the number of nodes, the default is 2.
-nodes <# of players>

-PORT sets the port from which to play Heretic multiplayer on the network. By setting a different port, more than one group of players can play Heretic on a single network. 
-port <# of the port>

MODEM PLAY
----------
When you want to play a modem or null-modem game, you need to run SERSETUP.EXE which is the device driver for Heretic's serial communications mode.  The parameters are as follows:

-DIAL tells the program which number to dial, if you're going to do the calling.
-dial <phone number>

-ANSWER puts your modem into Answer mode so someone can call you and play Heretic.
-answer

-COM1, -COM2, -COM3, -COM4 specifies which COM port your modem or serial cable is connected to. Very important!
-com1

-8250 tells SERSETUP to set the UART to 8250.  Just in case your 16550 UART is acting up at the higher speed.
-8250

-IRQ sets the IRQ for the COM port.
-irq <irq number>

-PORT sets the COM I/O port that SERSETUP uses to communicate with your modem.  To use hexadecimal, such as the number 0x3f8, you would type "-port 0x3f8".
-port <port number>

-<#> sets the baud rate of your COM port, overriding the value in the MODEM.CFG if you're running a modem game.  Legal values are 9600, 14400, 38400, 57600.
Example: -14400

Note that to run a null-modem game, you must have a null-modem cable plugged into a serial port on both computers and each computer runs SERSETUP.EXE with a -COM# parameter as well as any General Parameters.  Do not use the -ANSWER or -DIAL parameters, or SERSETUP will think you're using a modem. To get a null-modem cable, go to CompUSA or Radio Shack and say, "I need a null-modem cable to run a Heretic multiplayer game."

VERY IMPORTANT!
You will need to run the SETUP program and select Choose Modem from the Network/Modem/Serial menu so you can set your modem init string correctly.  Merely select the modem and press Enter and SETUP will create a new MODEM.CFG file that corresponds to your modem (the MODEM.CFG file is used by SERSETUP for initing the modem.)

If your modem is not in the list, you will most likely need to edit the MODEM.CFG file in the Heretic directory.  The first line of the file is an initialization string that:
    * Turns off error-correction
    * Turns off data-compression
The MODEM.CFG file has a Hayes-standard init string like this:
AT Z S=46 &Q0 &D0
You just add your own commands after the "AT Z " if your modem doesn't work with these settings -- dig up your modem manual for the correct settings.

The second line is a hangup string used when you quit Heretic.

The third line is the baud rate at which you want your COM port set.
The legal settings are: 9600, 14400, 38400, 57600.

If the modem connection isn't working when you call your friend, have him call you instead.  Try setting the modem to GENERIC (in the SETUP.EXE program) if your modems don't connect.

If you STILL can't get the modems to connect, both of you should run your favorite COMM programs and connect with 9600, no error correction and no data compression.  Then quit the COMM program and keep the connection going.  Then just run SERSETUP with a -COM# parameter (as if you were running a null-modem game) since you're already connected.

If you had trouble connecting, but figured out some settings that work, please fax them to us at (214) 686-9288 so we can expand our modem init string database and perhaps have the SETUP program ask you for your modem type in a future version of Heretic.

GENERAL PARAMETERS
------------------
These parameters can be passed straight to Heretic, or passed to IPXSETUP or SERSETUP, which then pass them to Heretic.

-LOADGAME allows you to start Heretic from a specified save game. Instead of using the saved game name, simply enter the number that corresponds to the slot you saved the game to on the SAVE GAME screen (0-5).
-loadgame <# of the game>

-DEATHMATCH starts Heretic as a DeathMatch game. If you don't enter DEATHMATCH as a command line parameter, Heretic will default to the Cooperative mode. All items picked up will
appear 30 seconds later and the Shadowsphere and Invulnerability Ring will not come back.
-deathmatch

-SKILL sets the skill level (1-5) you wish to play.   Only useful with -warp -- see below.
-skill <# of skill level>

-EPISODE sets the episode (1-3) you wish to play. The default episode is Episode One, City of the Damned.
-episode <# of the episode>

-CONFIG allows you to use your configuration file from any directory you choose. This is primarily for diskless workstations that don't have a C: drive to save config information to. You need to rename the heretic.cfg file created by the SETUP program to a directory and name of your choosing to avoid conflicts.
-config <pathname>  ex. -config f:\heretic\data\myconfig.cfg

-NOMONSTERS allows you to start playing with NO MONSTERS running around!  This is great for DeathMatch where, really, the monsters just get in the way.  Only useful with -warp -- see below.
-nomonsters

-RECORD tells Heretic to record the game you are starting. Demo files will be saved as <filename>.lmp.
-record <filename>

-RESPAWN tells Heretic that, yes, you are a badass, and yes, you want all the monsters to respawn around 8 seconds after you kill them.  The NIGHTMARE skill level already does this. Note that using -respawn and -nomonsters at the same time is a dumb thing to do.  Only useful with -warp -- see below.
-respawn

@<filename> will allow you to specify a Response file that Heretic will read additional command-line parameters from.  For example, typing 'Heretic @MYPARMS' will tell Heretic to look in the MYPARMS file for additional command-line parameters.  The file format is simply one parameter per line with a carriage return to terminate the line. Each parameter is typed exactly as you would type it on the DOS command-line.

-TIMER <# of minutes> will make Heretic exit the current level after a specified amount of minutes, going to the intermission screen. This option is only useful in DeathMatch mode.
-timer xxx

An example line for entering the above information would be: 
Heretic -loadgame 3 -deathmatch -skill 4 -timer 10

IMPORTANT:  Only the following command-line parameters are available while using the -WARP parameter:
-skill, -respawn.

-------------------------------------------------------------
TROUBLESHOOTING ADDENDUM
-------------------------------------------------------------
If you require technical assistance to run Heretic, call id Software's technical support line at (303) 339-7111 or  e-mail help@idsoftware.com.
 
If possible, please be near your computer when calling id Software's technical support. Please have information regarding your system setup and configuration available. 

Before changing your system or software setup we recommend that you review your system manuals to ensure that your modifications will not endanger any existing information or hardware on you system or network. Modifying your system or your software setup can be dangerous, and we cannot help you with any resulting problems.

-------------------------------------------------------------
When Heretic runs, I get an "Insufficient Memory" error or Heretic just doesn't run.

You don't have enough free RAM to run Heretic.  This usually happens with 4Mb RAM machines -- you need about 3Mb of free RAM to run Heretic. If you have DOS 6 or later, boot your system and hold the left-shift key as the "Starting MS-DOS..." message appears. This will bare-boot your system and you must change to the Heretic directory and run Heretic. Your best bet is to make a CONFIG.SYS menu for a custom Heretic boot -- see page 97 in your MS-DOS 6 User's Manual.  If you have DOS 5.0 or earlier, you must create a bare boot disk.        

Note: Do not use memory managers like EMM386, QEMM, etc. Do not use disk caching programs like SMARTDRV, etc.

-------------------------------------------------------------
I get a "WRITE ERROR" while Heretic is decompressing.

You are using a disk compression program such as STACKER or DOUBLESPACE. These utilities try to make an "educated" <ahem> guess as to how much disk space you have left.  Obviously, they're wrong.  Delete some big games that are chewing up hard drive space, like any Wolf-alikes or DOOM-alikes. :D

-------------------------------------------------------------
The Windows SETUP program runs after installation.

Heretic did not install to your hard drive, probably due to insufficient disk space.  See above answer for a solution.

-------------------------------------------------------------
My GUS doesn't work.

The default IRQ for a GUS is 11. Heretic doesn't handle IRQ's above 7.  Change this with your GUS setup program.

-------------------------------------------------------------
I can't get digital sound from my Sound Blaster compatible sound card.

You are experiencing a DMA conflict. You may have a CD-ROM or hard drive on the same DMA channel that you specified in Heretic's SETUP program. Change the DMA channel of the sound card or offending device.

-------------------------------------------------------------
Heretic locks up before I see the title screen or at the title screen.

You need to turn "Hidden Refresh" off in your CMOS Advanced Chipset settings. If you're using RAMBIOS.SYS, you must remove it from your CONFIG.SYS. Make sure you also turn off any Hardware Video Shadowing (also found in CMOS settings.)

-------------------------------------------------------------
Heretic runs really slow, locks or "pauses" on a fast system.

Some systems have a option in the CMOS setup for switching the speed of the PC from the keyboard. This is the "Turbo Switch" or "Turbo Switching" option. Disable this setting and your problem should be fixed.

-------------------------------------------------------------
I hear static when listening to Heretic with my Sound Blaster (or compatible) card.

Run SBP-MIX (in your SBPRO directory) and turn down Line and Mic volumes to 0.

-------------------------------------------------------------
I still hear static, or my sound effects are breaking up.

Disconnect any parallel port devices. (Sound cards, to work with Heretic, must use IRQ5 or IRQ7, which are used by LPT2 and LPT1 -- where printers are connected.)

-------------------------------------------------------------
I can't get sound on my ATI Stereo FX card.

Contact ATI for a BIOS upgrade.

-------------------------------------------------------------
Heretic is too dark to see anything.

On some monitors, Heretic may be too dark to play. Press F-11 to improve the view.

-------------------------------------------------------------
Why can't I get music or sound effects?

If you're not hearing sound effects and/or music, Heretic may have incorrect information regarding your sound card. Run the SETUP program to check if Heretic has the correct information on your sound card. 

Note: Heretic only supports IRQ numbers which or 7 or below.  Be sure you set your sound card to an IRQ number which is 7 or below. Refer to your sound card manual for details on setting your IRQ number. 

Note: This is particularly important for Gravis Ultra Sound users because the standard default for the GUS card is 11.

--------------------------------------------------------------
How can I run Heretic under OS/2?

The ideal Heretic-OS/2 system is a 486/66 with at least 8MB of RAM. In order to get Heretic up and running, first copy a program object to the desktop from the templates folder. For details on this procedure, please refer to your OS/2 Manual. Once you have the program path and optional command line arguments set up for the program object, you will need to edit the DOS session settings. 

In order to get Heretic up and running, first copy a program object to the desktop from the templates folder. For details on this procedure, please refer to your OS/2 Manual.

Once you have the program path and optional command line arguments set up for the program object, you will need to edit the DOS session settings. Heretic will NOT run in a DOS window.

The DOS settings are as follows:

Setting:                        		Value:
AUDIO_ADAPTER_SHARING           	REQUIRED 
COM_DIRECT_ACCESS               	ON
COM_HOLD                        		OFF
COM_RECEIVE_BUFFER_FLUSH  	NONE
COM_SELECT                      		ALL
DOS_AUTOEXEC          	*DRIVE:\AUTOEXEC.BAT
DOS_BACKGROUND_EXECUTION  	OFF
DOS_BREAK                       		OFF
DOS_DEVICE      	*DRIVE:\OS2\MDOS\LPTDD.SYS 
DOS_FCBS                        		16
DOS_FCBS_KEEP                   	8 
DOS_FILES                       		20 
DOS_HIGH                        		OFF
DOS_LASTDRIVE                   	Z 
DOS_RMSIZE                      		640 
DOS_SHELL   	*DRIVE:\OS2\MDOS\COMMAND.COM 
                      	*DRIVE:\OS2\MDOS 
DOS_STARTUP_DRIVE               	*** 
DOS_UMB                         		OFF 
DOS_VERSION                     		*** 
DPMI_DOS_API                    		DISABLED
DPMI_MEMORY_LIMIT               	4 
DPMI_NETWORK_BUFFER_SIZE        	64 
EMS_FRAME_LOCATION              	NONE 
EMS_HIGH_OS_MAP_REGION          	0 
EMS_LOW_OS_MAP_REGION           	0 
EMS_MEMORY_LIMIT                	0 
HW_NOSOUND                      	OFF 
HW_ROM_TO_RAM                   	OFF 
HW_TIMER                        		ON
IDLE_SECONDS                    		0 
IDLE_SENSITIVITY                	100 
INT_DURING_IO                   		ON 
KBD_ALTHOME_BYPASS              	ON 
KBD_BUFFER_EXTEND               	ON 
KBD_CTRL_BYPASS                 	NONE 
KBD_RATE_LOCK                   	OFF
MEM_EXCLUDE_REGIONS             	*** 
MEM_INCLUDE_REGIONS             	*** 
MOUSE_EXCLUSIVE_ACCESS          	ON 
**NETWARE_RESOURCES             	GLOBAL 
PRINT_SEPERATE_OUTPUT           	ON 
PRINT_TIMEOUT                   	15 
VIDEO_8514A_XGA_IOTRAP          	OFF 
VIDEO_FASTPASTE                 	OFF 
VIDEO_MODE_RESTRICTION          	NONE 
VIDEO_ONDEMAND_MEMORY           	OFF 
VIDEO_RETRACE_EMULATION         	OFF 
VIDEO_ROM_EMULATION             	OFF 
VIDEO_SWITCH_NOTIFICATION       	OFF 
VIDEO_WINDOW_REFRESH            	1 
**VIPX_ENABLED                  		ON 
XMS_HANDLES                     		0 
XMS_MEMORY_LIMIT                	0 
XMS_MINIMUM_HMA                 	0

*DRIVE = The drive your OS/2 system files are located on.  
**Only required for Network play 
*** Leave as default

-------------------------------------------------------------
During startup, the Heretic startup stops at "looking for node..."

This occurs when you enter a number of players greater than the amount of players actually entering the game. For example, if you only have three players playing, but you tell Heretic to expect four players, it will wait until the fourth player starts the game. Press ESC to exit and restart the game with the correct number of players. 

-------------------------------------------------------------
I'm receiving the error, "IPX NETWORK NOT DETECTED."

Currently, Heretic only supports a network that uses the IPX protocol. If you receive this message, check your network manual to ensure your network uses the IPX protocol. 

-------------------------------------------------------------
I've received the message, "CONSISTENCY FAILURE" while running Heretic.

For Heretic to run properly as a multiplayer game, all of the machines that are running Heretic must maintain a nearly identical status of the game during network play. If you receive this message, something has occurred which caused the multiplayer game on one computer to be different from the multiplayer games running on the other systems. If this occurs, all of the players must quit from Heretic and restart the game.

-------------------------------------------------------------
Why can't I get Heretic to run as a multiplayer game?

If someone else is running Heretic in multiplayer you may receive a network port conflict. From the SETUP program, change Heretic to run under a different port. Consult with the person in charge of your network to receive a valid port address. 

-------------------------------------------------------------
Why isn't the animation smooth?

If the animation isn't running smoothly on your system you should try reducing the window size. Refer to your Heretic manual for instructions on this options.  Or get a faster computer! :D

-------------------------------------------------------------
Why doesn't my mouse work with Heretic?

If you renamed or commented-out information in your AUTOEXEC.BAT you may have removed the command which loads your mouse driver. Loading your mouse driver into DOS can be as simple as typing MOUSE and pressing ENTER at the command prompt. 

-------------------------------------------------------------
Why can't I find a plasma rifle, BFG 9000, Berserk power-up, or invulnerability power-up?

Because you're playing Heretic, not DOOM or DOOM II. Please ask us questions that make darn good sense.

-------------------------------------------------------------
Why can't I find the Hellstaff or Phoenix Rod or any of the other really cool power-ups I've heard about?

Because you haven't bought the registered version of Heretic yet. These awesome components of Heretic are available ONLY in the registered version.  Call 1-800-IDGAMES for a remedy.